KAYDEN CLASSIC 800 Series Thermal Switch/Transmitter Electronics Module

Images are representations only.

L10-800-C-E

Series: Spare Electronics Module for Kayden CLASSIC® 800 Series Switches Brand: Kayden Instruments

Kayden CLASSIC 800 Series Thermal Switch/Transmitter Electronics Module

Price

$891.63 USD

Stock

100+ In Stock

Does not ship to OH, United States

Quantity

Request Information

Description

The Kayden CLASSIC 800 Series Electronics Module is for use in the following CLASSIC Models
- 810
- 812
- 814
- 816
- 828
- 830
- 832
Input Power
- 12-24 Vdc
- 115-230 Vac, 50 to 60 Hz
Outputs
- Dual SPDT Relay Contacts Rated @ 5 Amps Resistive 230 Vac or 24 Vdc Maximum
- Modbus via RS-485
Advanced Diagnostics
- Any open or shorted connection will result in a fault indication that also deactivates all relays and disables the heater circuitry
- An internal watchdog circuit ensures that the microprocessor code is performing as expected, and a secondary external watchdog circuit ensures that the microprocessor itself is functioning. In the event of a malfunction, both circuits force the contacts open, illuminate the Fault LED and force the heater off. This prevents the possibility of a “runaway” heater or a high thermal offset.
Intelligent User Controls
The Kayden CLASSIC 800 Series Display Panel features bright LED indicators for easy viewing even in direct sunlight.
An adjustable power-on Start-Up Bypass Timer is accessible from the Display Panel for low-flow alarm pump protection applications. This makes it possible to disable a pump on low flow and have it automatically restart after a predetermined time in the event of a power interruption.
Four adjustable delay timers allow the introduction of repeatable time delay into the (set point) relay trip function. For example, in a pump protection application, this function will shut down the pump after the switch sensor has gone “dry” for the pre-set time (delay) limit.
The Kayden RCM Software includes the option of locking the CLASSIC 800 Series Display Panel to eliminate field adjustments or tampering.
Modbus allows multiple Kayden units to be connected to the same communications bus (via RS-485) and monitored simultaneously.

Standard Features

4-Adjustable Independent Switch Point Timers
Adjustable Power-On Start-Up Bypass Timer
Adjustable Set Point Deadbands
Continuous Self-Test Diagnostics of Electronics & Sensor
Display Panel Lock-Out (controlled via the Kayden RCM Software)
Dual Independent Relays
Intelligent User Interface
Microprocessor-Based Electronics
No Mechanical Jumpers or Trim-pots
Process Temperature via Modbus and/or One or Both Alarm Relays
Relays are Factory Set to Monitor Flow
Temperature Compensation
Variable Heater Power

Product Series Specifications
Product Series Documentation

Description

The Kayden CLASSIC 800 Series Electronics Module is for use in the following CLASSIC Models
- 810
- 812
- 814
- 816
- 828
- 830
- 832
Input Power
- 12-24 Vdc
- 115-230 Vac, 50 to 60 Hz
Outputs
- Dual SPDT Relay Contacts Rated @ 5 Amps Resistive 230 Vac or 24 Vdc Maximum
- Modbus via RS-485
Advanced Diagnostics
- Any open or shorted connection will result in a fault indication that also deactivates all relays and disables the heater circuitry
- An internal watchdog circuit ensures that the microprocessor code is performing as expected, and a secondary external watchdog circuit ensures that the microprocessor itself is functioning. In the event of a malfunction, both circuits force the contacts open, illuminate the Fault LED and force the heater off. This prevents the possibility of a “runaway” heater or a high thermal offset.
Intelligent User Controls
The Kayden CLASSIC 800 Series Display Panel features bright LED indicators for easy viewing even in direct sunlight.
An adjustable power-on Start-Up Bypass Timer is accessible from the Display Panel for low-flow alarm pump protection applications. This makes it possible to disable a pump on low flow and have it automatically restart after a predetermined time in the event of a power interruption.
Four adjustable delay timers allow the introduction of repeatable time delay into the (set point) relay trip function. For example, in a pump protection application, this function will shut down the pump after the switch sensor has gone “dry” for the pre-set time (delay) limit.
The Kayden RCM Software includes the option of locking the CLASSIC 800 Series Display Panel to eliminate field adjustments or tampering.
Modbus allows multiple Kayden units to be connected to the same communications bus (via RS-485) and monitored simultaneously.

Standard Features

4-Adjustable Independent Switch Point Timers
Adjustable Power-On Start-Up Bypass Timer
Adjustable Set Point Deadbands
Continuous Self-Test Diagnostics of Electronics & Sensor
Display Panel Lock-Out (controlled via the Kayden RCM Software)
Dual Independent Relays
Intelligent User Interface
Microprocessor-Based Electronics
No Mechanical Jumpers or Trim-pots
Process Temperature via Modbus and/or One or Both Alarm Relays
Relays are Factory Set to Monitor Flow
Temperature Compensation
Variable Heater Power

Product Series Specifications

Specifications

Brand

Kayden Instruments

Input Power

Universal Power Input
12-24 Vdc, 120-240 Vac, 50/60 Hz

Output

4-20 mA (Thermal Signal, Scaleable) 120 Vac, Max.

Communication

Modbus RTU Communication-Alarms, Flow Status & Diagnostics
RS-485 Using Kayden's Remote Control & Monitoring Software (RCMS) or other Modbus Compatible Software

Electronics - Standard Features

100 % Digital Design. Electronics are Environmentally Sealed
4-Adjustable Independent Switch Point Timers
Automated Redundant Self-Test Diagnostics
Display Panel Lock-Out*
Easy Setup: No Mechanical Jumpers or Trim Pots
Incrementally Adjustable Heater Power (5 % Steps) with Automatic Over-Range Protection
Intelligent User Interface with Push-Button & Constant Display of Operation (Flow/Level)
Start-Up Bypass Timer
Temperature Compensation
Temperature Mode*: Process Temperature may be Displayed/Graphed in Flow/Level Mode
*Configurable only from the Kayden RCM Software